Sample name
|
Anti-mud Water Reducing Agent SM-KJ-40
|
Test project
|
Standard
|
Test result
|
Appearance
|
Colorless to pale yellow liquid
|
Meet
|
Appearance 1:3 dilution
|
Colorless to light yellow transparent liquid
|
Meet
|
Valid content %
|
40±2
|
40.5
|
Water %
|
60±2
|
59.5
|
PH(1% aqueous solution)
|
6.5-8
|
7.5
|
Anti-mud efficiency ≥ %
|
90
|
Meet
|
Water reducing rate %
|
25-40
|
Meet
|
Cement mortar fluidity≥
|
300
|
Meet
|
Characteristics:
As a Anti-mud Water Reducing Agent for commercial concrete with high mud.
As a compound of water reducing agent in low-mud commercial concrete to make Anti-mud Water Reducing Agent.
The result can reach the standard of high-grade concrete, using this product alone.
It can be compounded with various ionic products。
Method of use:
1. Direct dilution: This product is mother liquor, please dilute with deionized water, usually 1 ton diluted to 3-5 tons, high-grade concrete or high-sludge concrete is recommended to be diluted to 3 tons.More common requirement is diluted to 5 tons.
2. Use as a compound: Diluted 1 portion of this product into 3-5 portions with deionized water, and then compounded with ordinary water reducing agent.Usually the ratio is 1:1. After the product is compounded, it needs to be tested with the concrete ratio.Adjusting the proportion of the compound according to the test.It can be used when it meets your requirements.
3. Dosage after dilution or compounding:The dosage is generally 0.5-0.8%, depending on the dosage of sand and stone mud. According to specific experiment to increase or decrease the dosage.
Notice:Avoiding affect product performance, this product is strictly prohibited to be used with naphthalene or amino admixtures.
Package and Storage:
It is necessary that this product coverd with lid. Plastic drum packing, 200~1000±1kg/drum. Or bulk according to customer requirements.
|